Federal Reserve Economic Data

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000091

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000088

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000062

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000060

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000049

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000038

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000036

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000025

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000013

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000001

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000182

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000173

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000050

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000026

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000012

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000002

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04032229

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024886

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024232

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024231

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04024230

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000354

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000341

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000334

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000319

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000152

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNU04000014

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000164

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000089

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000038

The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000024

To obtain estimates of women worker employment, the ratio of weighted women employees to the weighted all employees in the sample is assumed to equal the same ratio in the universe. The current month's women worker ratio, thus, is estimated and then multiplied by the all-employee estimate. The weighted-difference-link-and-taper formula (described in the source) is used to estimate the current month's women worker ratio. This formula adds the change in the matched sample's women worker ratio (the weighted-difference link) to the prior month's estimate, which has been slightly modified to reflect changes in the sample composition (the taper). The series comes from the 'Current Population Survey (Household Survey)' The source code is: LNS14000014

View data of the unemployment rate, or the number of people 16 and over actively searching for a job as a percentage of the total labor force.

Source: Business Cycle Developments, March 1964, For 1949-1962 Data; August, 1966 And Following Months For 1963 And Later Data. This NBER data series m08310 appears on the NBER website in Chapter 8 at http://www.nber.org/databases/macrohistory/contents/chapter08.html. NBER Indicator: m08310

This series last appeared in the February, 2021 report: NROU (https://fred.stlouisfed.org/series/NROU)), formerly called "Natural Rate of Unemployment (Long-Term)." The natural rate of unemployment (NAIRU) is the rate of unemployment arising from all sources except fluctuations in aggregate demand. Estimates of potential GDP are based on the long-term natural rate. (CBO did not make explicit adjustments to the short-term natural rate for structural factors before the recent downturn.) The short-term natural rate incorporates structural factors that are temporarily boosting the natural rate beginning in 2008. The short-term natural rate is used to gauge the amount of current and projected slack in labor markets, which is a key input into CBO's projections of inflation.

Starting with the July, 2021 report: An Update to the Budget and Economic Outlook: 2021 to 2031 (https://www.cbo.gov/publication/57218), this series was renamed from "Natural Rate of Unemployment (Long-Term)" to "Noncyclical Rate of Unemployment". The natural rate of unemployment (NAIRU) is the rate of unemployment arising from all sources except fluctuations in aggregate demand. Estimates of potential GDP are based on the long-term natural rate. (CBO did not make explicit adjustments to the short-term natural rate for structural factors before the recent downturn.) The short-term natural rate incorporates structural factors that are temporarily boosting the natural rate beginning in 2008. The short-term natural rate is used to gauge the amount of current and projected slack in labor markets, which is a key input into CBO's projections of inflation.

OECD Data Filters: REF_AREA: AUT MEASURE: REG_UNE UNIT_MEASURE: PS TRANSFORMATION: G1 ADJUSTMENT: N SECTOR: S1 FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: AUT MEASURE: REG_UNE UNIT_MEASURE: PS TRANSFORMATION: G1 ADJUSTMENT: Y SECTOR: S1 FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: AUT MEASURE: REG_UNE UNIT_MEASURE: PS TRANSFORMATION: G1 ADJUSTMENT: N SECTOR: S1 FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: AUT MEASURE: REG_UNE UNIT_MEASURE: PS TRANSFORMATION: G1 ADJUSTMENT: N SECTOR: S1 FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: A All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF_M UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: N SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: F AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: Q All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).

OECD Data Filters: REF_AREA: JPN MEASURE: UNE_LF UNIT_MEASURE: PT_LF_SUB TRANSFORMATION: _Z ADJUSTMENT: Y SEX: M AGE: Y_GE15 ACTIVITY: _Z FREQ: M All OECD data should be cited as follows: OECD (year), (dataset name), (data source) DOI or https://data-explorer.oecd.org/ (https://data-explorer.oecd.org/). (accessed on (date)).